Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Lista de Productos
Modelo: oval tubes
Marca: Huijie
Paquete: Paquete de paquetes, caja de madera
productividad: 3000 tons/month
transporte: Ocean
Lugar de origen: Zhejiang, China
Apoyo sobre: 3000 tons/month
Certificados : ISO9001-2008, TS16949
HS-Code: 73043190
Hafen: Shanghai,Ningbo
Tipo de Pago: T/T
Incoterm: FOB,CFR,CIF,FCA
JIS G3445 STKM11A STKM12C STKM13C tubos de acero con forma ovalada interior redonda exterior para casquillo de goma automático
Tubos mecánicos sin soldadura de carbono y acero aleado
Aplicaciones: para buje de goma automático
Rango de tamaño: OD: 6-168 mm WT: 1-15 mm L: max12000 mm
Grado de acero JIS G3445 STKM11A, 12C, 13C u otros, composición química:
Propiedades mecánicas:
JIS3445 | C | Si | Mn | P | S | Nb or V | Tention Test | Flateniug | Bendability | ||||
Symbol |
T.S. N/mm^2 |
Y.P. N/mm^2 |
Elongation | ||||||||||
No 4,11,12 Test pe |
No 4,5 Test pe |
Distance Between Flatened Plates |
Band Angle |
Inside Radius |
|||||||||
STKM11A | 0.12 max. | 0.35 max. | 0.60 max. | 0.040 max. | 0.040 max. | . | 290 min. | . | 35 min. | 30 min. | 1/2D | 180 | 4 D |
STKM12A | 0.20 max. | 0.35 max. | 0.60 max. | 0.040 max. | 0.040 max. | . | 340 min. | 175 min. | 35 min. | 30 min. | 2/3D | 90 | 6 D |
STKM12B | 390 min. | 275 min. | 25 min. | 20 min. | 2/3D | 90 | 6 D | ||||||
STKM12C | 470 min. | 355 min. | 20 min. | 15 min. | . | . | . | ||||||
STKM13A | 0.25 max. | 0.35max. | 0.30 to 1.00 | 0.040 max. | 0.040 max. | . | 370 min. | 215 min. | 30 min. | 25 min. | 2/3D | 90 | 6 D |
STKM13B | 440 min. | 305 min. | 20 min. | 15 min. | 3/4D | 90 | 6 D | ||||||
STKM13C | 510 min. | 380 min. | 15 min. | 10 min. | . | . | . | ||||||
STKM14A | 0.30 max. | 0.35 max. | 0.30 to 1.00 | 0.040 max. | 0.040 max. | . | 410 min. | 245 min. | 25 min. | 20 min. | 3/4D | 90 | 6 D |
STKM14B | 500 min. | 355 min. | 15 min. | 10 min. | 7/8D | 90 | 8 D | ||||||
STKM14C | 550 min. | 410 min. | 15 min. | 10 min. | . | . | . | ||||||
STKM15A | 0.25 to 0.35 | 0.35 max. | 0.30 to 1.00 | 0.040 max. | 0.040 max. | . | 470 min. | 275 min. | 22 min. | 17 min. | 3/4D | 90 | 6 D |
STKM15C | 580 min. | 430 min. | 12 min. | 17 min. | . | . | . | ||||||
STKM16A | 0.35 to 0.45 | 0.40 max. | 0.40 to 1.00 | 0.040 max. | 0.040 max. | . | 510 min. | 325 min. | 20 min. | 15 min. | 7/8D | 90 | 8 D |
STKM16C | 620 min. | 460 min. | 12 min. | 7 min. | . | . | . | ||||||
STKM17A | 0.45 to 0.55 | 0.40 max. | 0.40 to 1.00 | 0.040 max. | 0.040 max. | . | 550 min. | 345 min. | 20 min. | 15 min. | 7/8D | 90 | 8 D |
STKM17C | 650 min. | 480 min. | 10 min. | 5 min. | . | . | . | ||||||
STKM18A | 0.18 max. | 0.55 max. | 1.50 max. | 0.040 max. | 0.040 max. | . | 440 min. | 275 min. | 25 min. | 20 min. | 7/8D | 90 | 6 D |
STKM18B | 490 min. | 315 min. | 23 min. | 18 min. | 7/8D | 90 | 8 D | ||||||
STKM18C | 510 min. | 380 min. | 15 min. | 10 min. | . | . | . | ||||||
STKM19A | 0.25 max. | 0.55 max. | 1.50 max. | 0.040 max. | 0.040 max. | . | 490 min. | 315 min. | 23 min. | 18 min. | 7/8D | 90 | 6 D |
STKM19C | 550 min. | 410 min. | 15 min. | 10 min. | . | . | . | ||||||
/D | 0.25 max. | 0.55 max. | 1.60 max. | 0.040 max. | 0.040 max. | 0.15 max. | 540 min. | 390 min. | 23 min. | 18 min. | 7/8D | 90 | 6 D |
1. La variación del grosor no puede conducir a la pared fuera de las desviaciones límite con respecto al grosor de la pared.
2. En la sección transversal de la tubería, la desviación del ángulo recto no puede ser superior a ± 1.5 °.
3. La curvatura de la tubería no puede ser superior a 2 mm por 1 m de longitud.
Las tuberías se producen sin ajuste, en este caso la curvatura no está regulada.
Tolerances on OD |
|
Division |
Tolerance on OD |
No.1 |
under 50mm ±0.5mm
50mm or over ±1%
|
No.2 |
under 50mm ±0.25mm
50mm or over ±0.5%
|
No.3 |
under 25mm ±0.12mm
25mm or over to and excel.40mm ±0.15mm
40mm or over to and excel.50mm ±0.18mm
50mm or over to and excel.60mm ±0.20mm
60mm or over to and excel.70mm ±0.23mm
70mm or over to and excel.80mm ±0.25mm
80mm or over to and excel.90mm ±0.30mm
90mm or over to and excel.100mm ±0.40mm
100mm or over ±0.50%
|
Nota 1. Para tubos de acero sin costura con acabado en caliente, se aplicará la tolerancia de diámetro exterior No.1.
2. La tolerancia en el diámetro exterior de los tubos templados y revenidos será la que acuerden el comprador y el fabricante.
Tolerances on WT |
|
Division |
Tolerance on WT |
No.1 |
under 4mm +0.6mm -0.5mm
4mm or over +15%-12.5%
|
No.2 |
under 3mm ±0.3mm
3mm or over ±10%
|
No.3 |
under 2mm ±0.15mm
2mm or over ±8%
|
PRODUCTOS POR GRUPO : Tubos de acero perfilados > Tubos de acero en forma
Home > Lista de Productos > Tubos de acero perfilados > Tubos de acero en forma > Tubos de acero de forma ovalada para casquillo de goma
Realizar consulta
Mr. Kevin
Número de Teléfono:86-0574-87491308
Fax:86-0574-84491848
Móvil:+8613355844917
Email:sales@hjbearingtube.com
Dirección:Industrial Park, Zhangting Town,Yuyao City, Ningbo, Zhejiang
Sitio movil
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.